Gpm Trx4h100f Aluminum Front C-hubs Knuckle Arms Spindle Gear Cvd Steering Link1/10 Rc Traxxas Trx-4
GPM RACING
Gpm Trx4h100f Aluminum Front C-hubs Knuckle Arms Spindle Gear Cvd Steering Link1/10 Rc Traxxas Trx-4
GPM RACING
$86.90
- In Stock
- Code: TRX4H100F-B
Accessories:
Front C-hub 2pcsSteering Tie Rod 1pc
Aluminum Front Knuckles Inner Part 2pcs
Aluminum Front Knuckle Outer Case 2pcs
Front Cvd 2pcs
Spindle Gear 2pcs
King Pin 4pcs
Stainless Steel Flat Head Screw 2.5x10 6pcs
Stainless Steel Round Head Screw 3x14 2pcs
Stainless Steel Round Head Screw 3x16 4pcs
Stainless Steel Round Head Screw 3x18 4pcs
Stainless Steel Round Head Screw 3x20 2pcs
3x6x2 Alloy Collar 6pcs
Stainless Steel Round Head Screw 2.5x3 6pcs
Stainless Steel Cap Head Screws 2.5x8 4pcs
Stainless Steel Cap Head Screws 2.5x10 12pcs
Major Advantages Of Upgrading To This Part/product :
1. Made With A Quality Light Weight High Tensile Strength Aluminum 6061 T6 For Greater Support And Durability.positioning Holes On C Hubs Are Inserted With Delrin Collars To Avoid The Friction Between Metals.
2. Compare To Original C-hub Design, The Bottom Of This C-hub Is Reduced Significantly To Create More Room Under The Body.
3. The Knuckle Arm Design Has Changed By Increasing The Internal Gear, Pitch, Diameter And Lowering The Center Position Of The Axle To Increase The Height Of The Body By 1.2mm. Further Enhance The Overall Performance.
4. The Position Of Dampers Are Modified After The Installation Of This Product. Original Installation: The Dampers Sit In A Vertical Position. Modified Installation: The Dampers Sit Slightly Outward. This Is To Enhance The Stability Of The Vehicle And Allow Adjustment On The Height Of Shocks.
Other Special Notes And Comments:
Suitable For:
All Trx-4 Models.Due To The Increased Diameter Of The Knuckle Arms, Gpm Racing # Trx4023, Trx4023a, Trx4023b, Trx4023c, Trx4023x, Trx4023xl (pendulum Wheels) Are Not Suitable To Use With This Set.
